Avionics Suite for StreamDeck XL & PLUS (AAO)
G1000, GNS 530, GNS 430, KAP140, Standard AP, NAV, COM, XPDR, BARO, G1000 PFD, G1000 MFD and G3X (only PLUS)
for AxisAndOHS and its StreamDeck plugin
To use the G3X you need currently the SU15 beta!!!
NOTE:
You need the latest StreamDeck plugin from the AAO download page. ("Plugin for the Elgato Stream Deck")
You need also the "MSFS: G1000 Bridge" from the same side
ATTENTION!
PLEASE READ CAREFULLY!
- When you import SD profiles, make sure to delete the old ones, otherwise you'll get profile copies.
- Make sure to always have the latest AAO and AAO StreamDeck plugin versions!
- I just create the SD profiles! For any connection issues, SD plugin not working, Buttons show "?" or nothing, no reaction of the SD etc., please contact the developer of AAO! And please read the AAO Manual or the short Troubleshooting PDF
- It is - as the title says - just for the StreamDeck XL (!). Please do not ask for a 15 button conversion. This will not happen as this will more than double the amount of development and support for me as I do not have a 15 button SD. Sorry.
- Please ask if you want to use parts of my SD profiles, icons or AAO scripts or whatever! And please ask everytime you start a new project! You have to credit and link me in your description!
- If you use my work, you are then NOT allowed to beg for own donations!
Installation:
doubleclick on Standard Avionics Suite.streamDeckProfile
(make sure to delete previous versions first - otherwise you get copies).
doubleclick on PLUS Standard Avionics Suite.streamDeckProfile to install for the SD PLUS
Download and open the "zzz-lorbysi-aao-wtg1000.zip" and drop it into (or link it to) your community folder!
The FSR500 needs a special version of the Lorby WT G1000 Bridge.
Download (MFSF: G1000 Bridge -> Special version for FSReborn G1000) and open the "zzz-lorbysi-aao-fsrg1000.zip" and drop it into (or link it to) your community folder!
Usage:
You can link directly to certain pages from your addons.
Example: to get to the G1000 MFD, you make a "Change Profile" button, linking to "Standard Avionics Suite", "page 4"
litlle numbers at the folder icons make it easier to link
It is a lot of work to do these icons and gather the variables. If you like it, please consider a little donation, thx!
The issue: With the Stream Deck Plus profile for NAV COM - when Com 1 is active, the button text upper half part is black (blank). It never turns gray or blue (for clarity, I'm referring to the upper button, not the display that shows the frequency) the upper half text only turns gray and displays when I Press it to switch to COM 2 which turns blue. Is there a setting that got switched around causing that not to come on?
16 days ago
15 days ago
Guenseli
13.Uniform
I have also the failure that the VS buttons Noseup/Nosedown dont work in the G1000 Autopilot. In the Standard Autopilot it works. (Standard DA62 in game)
For my case i copied the 2 commands from the Standard Autopilot to the G1000 Autopilot. Is there any disadvantage to do this like me?
28 days ago
28 days ago
Guenseli
AntiIce
But I can confirm what the previous speaker said:
Nose up and nose down do not work.
Likewise HDG(for synchronization) and HDG-(+) only work with a long press (but then at a rate of 10).
HDG-- and HDG++ work.
My Addon COWS DA42
1 months ago
ralhue
2 months ago
2 months ago
Guenseli
edmoore
2 months ago
2 months ago
Guenseli
oellph
2 months ago
Holly203
FLC is misbehaving in the SD+ G1000 AP panel. Can you have a look? Maybe swap it with BC button?
2 months ago
zbootsum
2 months ago
2 months ago
Guenseli
JesuVL
Question for this most recent update, on the NAV COM in the Stream deck Plus, my Com 1 never turns gray or blue (on the upper button) - It only turns gray or blue when pressing it to switch to the Com 2. Is there a setting that got switched around causing that not to come on?
2 months ago
2 months ago
Guenseli
13.Uniform
2 months ago
2 months ago
Guenseli
oellph
Thanks for another great set of profiles.
On the PLUS profile, where can I find the Dial Icon used for HDG, ALT, and SPD so that I can add it to the VS button?
Thanks
5 months ago
kwmcb
Using Navigraph G1000 plugin.
StreamDeck MFD Activate button (softkey 5) label text remains grey instead of changing to white after selecting a flight plan in the Flight Plan Catalog. In-cockpit panel button changes to white correctly.
6 months ago
6 months ago
Guenseli
DownedAviator
Just last night I installed the new Navigraph G1000 plugin that adds in-cockpit chart and flightplan capabilities, and one of the things that struck me was a significant increase in the number of dynamic softkey functions, and I thought wouldn't it be nice if the text on the StreamDeck buttons could change dynamically as well.
Wonder of wonders, I wake up this morning and find this update does exactly that.
Also, with the charts feature I found some cases where I needed to use the mini cursor/joystick which again I thought wouldn't it be nice if my StreamDeck could operate that instead of having to use my mouse, and glory be there it is in this update.
You read my mind 🙂 Thank you very much 👍
6 months ago
6 months ago
Guenseli
DownedAviator
7 months ago
6 months ago
DownedAviator
Archaic
ist das GNS750 noch in Planung. Nutze es für die A2A PA-24??
Viele Grüße
8 months ago
oskar11