Зареждане на...

Applications

Exclusive

4.65 STARS

7.2K+ Downloads

AIGround

AIGround is a MSFS simconnect utility designed to improve AI taxi characteristics. AIGround: (1) holds the AI stationary on the tarmac after pushback for a more realistic amount of time, (2) perform control surface checks as they begin their taxi out, (3) increase or...


За

AIGround is a MSFS simconnect utility designed to improve AI taxi characteristics at the airport the user’s aircraft is located at.  

AIGround holds the AI stationary on the tarmac after pushback for a more realistic amount of time before the AI begins its taxi out.  

The AI will also perform control surface checks as they begin their taxi out (if control surface animations are supported by the AI model in use).

AIGround can also optionally increase or decrease the AI’s taxi speed.  

AIGround also prevents the AI from spinning while stationary at the threshold (a bug of the native AI control program).

The user can also optionally reduce or extend the AI landing and takeoff ground rolls.  

AIGround enforces better spacing between the user's aircraft and AI (both aircraft and ground vehicles) when the user is performing a taxi-out or taxi-in.  AIGround does this by commanding the AI to temporarily stop in situations that the normal MSFS AI control program would miss.

When the user’s parking brake is engaged, taxi incursion detection for AI aircraft is disabled because the user has signaled an intention to stop the aircraft’s movement longer term (e.g., the user’s aircraft is parked at the gate) (e.g., the user is holding short indefinitely at a hold short line). When the user’s taxi lights are OFF, taxi incursion detection for AI ground vehicles is disabled because the user has signaled an intention to not taxi so that ground service vehicles can closely approach the user’s aircraft to provide service (baggage, gpu, push-back vehicles, etc).  Note however regardless as to whether user-AI separation is disabled, the native MSFS AI taxi control program may continue to stop AI independently of AIGround.

However, in situations where the user might want stopped AI to continue its taxi (e.g., giving way an intersection) (e.g., moving a backed up line of AI), the user can flash the landing lights or strobes (on certain aircraft flashing the strobes is much easier) off-on-off as a signal to the AI to continue the taxi.  Note however that the native MSFS AI taxi control program may continue to stop AI independently of AIGround.

The user can also ZAP (remove) AI traffic (both aircraft and ground vehicles) that has become stationary (stuck) and is blocking the user’s path by turning the landing lights on, then flashing the strobes off-on-off.  

AIGround does not require a configuration file to run, however the configuration file AIGround.ini is included, which contains several parameters that the user may change to suit personal preferences.

AIGround is designed to compliment the default MSFS AI program and thus is fully compatible with it.  Thus, AIGround is compatible with any AI-related program that places AI mostly under control of the default AI program (SU11), such as MSFS live traffic, MSFS off-line traffic and external AI injection programs that mostly rely upon the default AI program after injection.   

AIGround operates externally via simconnect and thus makes NO changes to the MSFS sim. 

See the included readme.txt and readme.pdf for additional details.

AIGround AIFlow SimConnect Traffic
Details
Съвместимост
Sim Update 11
Категория
Applications
Първоначална версия
October 26, 2022
Последна актуализация
1 day(s) ago — 2.0.7

Version

2.0.7

Размер на файла

878.78 KB

Downloads

7,239

Този файл е проверен за вируси и е безопасен за изтегляне.

Информация за файла

Абонати
230
Рейтинг
4.65/5.0 — Превъзходно!
Status
Все още не е изтеглено
Днешни изтегляния
127

Timeline

  • Актуализиран до версия 2.0.7

  • Актуализиран до версия 2.0.6

  • Актуализиран до версия 2.0.5

  • Актуализиран до версия 2.0.4

  • Актуализиран до версия 2.0.3

  • Актуализиран до версия 2.0.2

  • Initial File Release

Превъзходно!
Въз основа на 23 оценки
😢
0
тъжен
😠
0
ядосан
😮
0
шокиран
🙏
26
благодарност
😂
0
развеселен
😍
16
влюбени

Разрешения

Разрешение за качване
Не е разрешено да качвате този файл на други сайтове при никакви обстоятелства.

Разрешение за промяна
Преди да ви бъде позволено да променяте или подобрявате моя файл, трябва първо да получите разрешение от мен.

Разрешение за преобразуване
Не е разрешено да конвертирате този файл при никакви обстоятелства.

Разрешение за използване на активи
Трябва първо да получите разрешение от мен, преди да ви бъде позволено да използвате активи от моя файл.

© ClipperOS - All rights reserved. Всяко повторно качване или разпространение на този файл без предварителното писмено съгласие на автора е забранено. Този Flight Simulator 2020 Mod е създаден от ClipperOS and shared in Utilities » Applications за Microsoft Flight Simulator.


118 Коментари

User Reviews

4.65/5 - Based on 23 reviews

Review data

5 star reviews
70%
4 star reviews
22%
3 star reviews
9%
2 star reviews
0%
1 star reviews
0%

Споделете мислите си

Ако сте използвали тази добавка, споделете мнението си с други пилоти.

Напишете преглед

For the users having issues with user-AI ground vehicle separation impacting services while parked (e.g., GSX, push-back addons, etc), please test this hotfix.

https://www.mediafire.com/file/f1komtn1xkcpkgq/AIGround207HotFixTest.zip/file

The fix is that user-AI ground vehicle separation will only become active when the user turns on their aircraft's taxi lights (indicating an intention to taxi and that all ground service vehicles have completed their tasks).

Please report back to me, I would like to get this update uploaded soon as this is appears to be a usability issue affecting a chunk of users. Thanks!

image

Yellow11

1 day(s) ago / Благодарности от ClipperOS

When used, it interferes with GSX Pro and partially interferes with the ground worker's animation.

As far as we can tell, it cancels all animations until the ground worker with the bypass pin that spawns when pushback is requested reaches the nose gear.

image

balu0

1 day(s) ago / Благодарности от ClipperOS

AI vehicle code stops ground services, tug fuel truck ect wont be able to connect to the player. Had to turn it off.

Anyone uses AIGround and/or AIFlow with FShud ? Are there any conflicts ? Do they play nice with each other ?

Well done with both AIGround and AIFlow, your utilities seem to have sorted out all of the bunched-up aircraft, thus making all AI traffic more real when they are taxing, departing, and arriving. I haven't seen any recent GoArounds.

Hi, are there any updates planned for SU11?

Thank you for your great tool. I have installed AIground v2.04 and FSLTL 1.2.1 in MSFS SU11 WU11. Now I've two issues when running "AIground" and "fsltl-traffic-injector" in parallel, at various airports stock or 3rd party, like EGLL, EGCC, KBOS, CYYZ:

  • Aircraft stick to the runways on take-off, they run in the direction of the RWY to infinity
  • at EGLL at RWY09R aircraft cleared for take-off at "hold short node" seem to loose connection to the"nodes of the taxiway" and creep to south west across the water

The taxi behaviour works better than default - also after landing - according to the configuration settings of "AIground.ini".

I did that with default settings and a little tweaking in "AIground.ini" to accelerate movements during taxi (max. 22kts limitation on taxiways, 40kts on runways after landing).

My hope was to have faster AI-traffic movements on the ground, after landing and on taxiways, this works ok, but "take-off" with "FSLTL" running at the same time does not work.

When running "FSLTL" without "AIground" take-off" is no issue.

Is there a possibilty to check compatibility to "FSLTL"? Maybe there are side effects with "FSLTL", e.g. the removal of aircraft sticking at "runway nodes" for, e.g. >120seconds.

Do you have any blog or forum where one can follow your development and process for AIGround/AIFlow?

Would be really interesting to see what you are up to!

Hi there, thanks for fantastic addons. However, the AI aircraft did not take off, just slide on the grass besides the runway. How to fix this?

If you use addon linker you can add both airflowe (exefile) and air ground (exefile) to tools-options -additionals options, link exe file in there.

All looks good with the AI ground new hotfix ....landings are great now without changing the ini file , the only last thing which would make it superb is that when the aircraft are at stand thet rotate about 45 degrees after a short while , hopefully this can be fixed then it will be excellent , keep up the great work

image

mjleprix

3 month(s) ago / Благодарности от ClipperOS

slight correction it did it with the first landig and arrival at gate but the next six were all ok. Well done and many thanks for your time spent to date.

great addon but even with latest update they still hit the gate at 45' and start to slowly spin round. But keep up the good work as it does the trick with everything else.

Although it is good that aircraft do not stop when transitioning from rollout to taxiing speed, I prefer the previous version where I could extend the rollout to just ahead of the taxiway turnoff before the plane slows to taxi speed using AILANDINGTARGETTIME.

Now when I set AILANDINGTARGETTIME to anything above 0 as soon as aircraft exit the runway they charge off like an enraged rhino across the airport running through buildings etc and heading off cross country to the horizon.

Good work on this.

My only two issues are that the aircraft come to a dramatic stop on rollout too soon and then continue, although with your ini fix they do depart the runway quicker which is great.

The other thing is which has been mentioned and I know you are looking into is that they taxi to stand a bit fast and start to spin at gate , if these issuess are fixed then it wil be perfect.

"To start AIGround automaƟcally when MSFS starts, add an entry for AIGround to the MSFS exe.xml file at:

AppData\Local\Packages\MicrosoŌ.FlightSimulator_8wekyb3d8bbwe\LocalCache\exe.xml"

The only xml file I see there is the SimConnect.xml. No exe.xml. Even if there were one I wouldn't know what to add. Can anyone enlighten me?

I just tried this mod and was excited to see two GA aircraft taxiing out to the active runway. Their speed seemed realistic, one following the other. Each stopped for half a moment before turning onto the runway - good - then each, in turn, taxied about 25 meters along the runway before actually starting their takeoff roll. Odd.

I didn't watch the first one carefully but noticed, when I looked for it, I couldn't see it climbing out. The next one I watched and it seemed to disappear after passing the end of the runway. I fly in VR with a Rift S so _maybe_ it just pixelated away at that point. I don't know.

This looks promising but, I have to say, landing at another similar sized airport - with parking spaces - I didn't see any taxiing happening. I fly every day so we'll see what happens today.

I've yet to land or take off from an airport with jet liners so I haven't witnessed AIFlow in action yet. Hoping for good things with it.

Liked. Will add stars after more testing.

thank you very much for these fabulous plugins AIGround and AIRFlow thank you very much for this. Can someone help me with two problems I'm having

1. In the airports where the planes never take off, with these tools they manage to reach the runway and do not stop, but they behave strangely. After 2 seconds the plane moves but does not turn on the white strobers and moves as if it were in a taxi. what am I doing wrong

2. How do I get both programs to start automatically when I start MSFS on STEAM?

hope someone help me

does this work with fsltl ai traffic??

"AIGround can also optionally increase or decrease the AI’s taxi speed."

does this mean aiGround decides when to increase taxi speed up to the max limit set in the .ini? or does it mean aircraft will always taxi with the set speed. or how is this supposed to work? because I dont seem to see any change in taxi speeds even when setting 40.0

thanks




Roadmap
Тези елементи в момента са в списъка и ще бъдат обработени скоро!
Backlog
Предложения, грешки и идеи за бъдещето.

  • Version 2.0.7 January 28, 2023

    (1) user-AI ground vehicle separation is disabled when the user turns OFF their taxi lights, which signals an intention to not taxi so that ground service vehicles can closely approach the user’s aircraft to provide service (baggage, gpu, push-back vehicles, GSX-addons, etc). As before in earlier versions, user-AI aircraft ground separation is disabled when the user engages their parking brakes.

  • Version 2.0.6 January 27, 2023

    (1) fixed blank system tray icon.
    (2) fixed user inadvertently freezing output console causing program to freeze (this was fixed a while ago, but accidentally re-introduced into 2.0.5 ironically while working on thread improvements).
    (3) improved efficiency of simconnect calls.

  • Version 2.0.5 January 24, 2023

    (1) user aircraft-AI spacing enforcement (and traffic zapper) now apply to both AI aircraft and AI ground vehicles (default).
    (2) AIGround now remains active when user in air, but below 2000 ft AGL (default) to help when AI is PRECEDING the user’s aircraft on final approach (the AI can complete its rollout & vacates quickly under control of AIGround).
    (3) added option to disable fast AI turns off runway after landing (in cases where AI is overshooting taxiway while vacating).
    (4) fixed prop AI not vacating runway (disabled high speed exit for props for now due to nose wheel skid issue).
    (5) added system tray icon options.
    (6) .ini read after file changes saved (i.e., periodic read deprecated).
    (7) fixed AIPUSHBACKHOLDTIME=0 (i.e., disabled) causing AIGround crash.
    (8) fixed occasional output console freeze.
    (9) fixed occasional AIGround crashes and various code optimizations.

  • Version 2.0.4 November 10, 2022

    2.0.4:

    (1) added AI high speed runway taxi after the landing rollout (default 40 kts). Helps get the AI off the runway quickly after landing, see AITaxiSpeedOnRunwayAfterLanding in readme.;
    (2) changed default landing and takeoff rollout times to 5 and 14 seconds respectively (enabled) to better support the new fast runway taxi feature and to support faster AI runway operations generally at busier airports;
    (3) added auto-removal of AI that had has stopped taxiing for a specified period of time, see AIZapAutoTime in readme;
    (4) fixed AI vacating the runway too quickly while turning.

  • Version 2.0.3 November 05, 2022

    2.0.3: (1) fixed AI landing rollout sudden stop; (2) tweaked taxi algorithm to reduce occasional spinning at gate; (3) fixed frozen console (e.g., user scrolling through console) sometimes stalling program, increased console output efficiency and added succinct mode (verbose=0) eliminating AI status messages.

  • Version 2.0.2 November 02, 2022

    2.0.2: fixed thread issue that occasionally caused AIGround to crash by itself (AIGround would end, but NO sim CTD).

Често задавани въпроси

Въпроси? Намерете своето решение тук.


Доста празно тук.

Дарения

Тези потребители са направили дарения за ClipperOS за да продължи да прави страхотни добавки, на които всички могат да се наслаждават.

Зависимости

These add-ons may be required or recommended to use.


Доста празно тук.