Version 2 Updates:

- Enhanced PBR materials/complete maps.
- Adjusted color values to achieve better in-game realism/accuracy (brightness and contrast levels, and hues in some cases).
- Added detail of the side door & hinge to the bump maps (normal maps), albedo and complete maps.
- Added the datum line plates (mounted on the port-side, forward and rear fuselage).
- Added the IFF aerial connection ports on fuselage to those that have them in reality (as seen within area of fuselage roundels).
- Re-textured the side door handle to uniquely match the real-world side door handle on each individual example.
- Painted the rear cockpit/glazing forward frame (before, by default, this was incorrectly painted the interior cockpit pale green color).
- Updated a few (mostly hidden) elements of the tail textures on some repaints.
- Added non slip on port wing of TB252 (matching real world aircraft).
- Removed modern non slip from port wing of factory fresh PT879 (now it looks no different than it would have when delivered new in 1944).
- A number of other small additions and refinements so that each repaint is on par with the other.

This repaint, made for the FlyingIron Simulations Spitfire Mk.IXc, depicts the restored Spitfire Mk.IX PT879 as it would look without the Russian markings, and simply left in its original Castle Bromwich factory-delivery paint scheme.

This Spitfire Mk.IX, given the RAF serial number PT879, was originally completed at the Vickers-Supermarine Castle Bromwich Aeroplane Factory, located near Birmingham, UK, on August 4, 1944. Following flight testing, it became one of the 1,185 Mk.IX Spitfires provided to Russia under the lend-lease program. In October 1944 it was sent by sea from Cardiff, Wales, to the Russian port at Murmansk. There it joined 2nd Squadron, 767th Regiment, 122nd Division of the Soviet Air Force, operating in the Murmansk region. On May 18th, 1945, the aircraft was involved in a mid-air collision with another Spitfire, over the Kola Penisula. The pilot of PT879, Lt. Semyonov, was able to successfully bale out. At the time of the incident, the aircraft only had little more than 18 flying hours. 

In 1997, the battered but well preserved wreckage of PT879 was recovered from Russia for Spitfire restorer, Peter Monk, and brought to the UK. In 2001, Peter Teichman, owner of Hangar 11 Collection at North Weald, UK, acquired the airframe. After remaining in storage for several years, Teichman contracted with Airframe Assemblies on the Isle of Wight to rebuild the fuselage. With the fuselage completed in 2014, and some years spent collecting parts, the project was eventually put in the hands of the Biggin Hill Heritage Hangar for completion. Using as many parts as possible from the original airframe, the rebuilt/restored PT879 was finally completed in October 2020. Highly experienced warbird pilot, Pete Kynsey, flew the aircraft for the first time on October 28th, flying out of Biggin Hill where the final restoration work had been completed. The highly-detailed and accurate restoration is finished as it is believed to have appeared in May 1945, complete with Russian markings hastily painted over the factory RAF markings. Owner, Peter Teichman, finally got to fly his pride and joy in mid November, and following a bit more work - fitting bomb racks and replica 250 lb. bombs - Teichman was able to fly the Spitfire home to North Weald in January. 

PT879 is one of only two Spitfires known to survive that served with Russia during World War Two, and it is the only one that has now been restored and flies again.

~ Repaint Details ~

- Although based on the product paintkit, the textures have been considerably modified and improved. Customized complete maps (PBR) and normal maps (3D detail) have been made.
- The positioning of the rivets and panel lines on the left elevator has been fixed (they're not positioned correctly in the product paint schemes).
- The inaccurate access panels on the cowlings have been removed and the actual access panels, as found on the Mk.IX Spitfre, have been added, as well as a couple of panel lines missing in the product paint schemes. The battery access panel has been added to the starboard rear fuselage, as well as the circular inspection panels on both sides of the rear fuselage. The electrical/radio socket access panel has been added to the port-side wing/fuselage fillets.
- The cannon shell and link ejector chutes, as well as the bomb rack connection points and jack holes, have been added into the textures on the base of the wings.
- The colors were all extensively researched and experimented with to achieve accurate in-game results, matching the same authentic colors as seen on the restored PT879.
- The imperfect demarcation between the top and bottom colors of the camouflage is done to match the restoration, and this was the way that Castle Bromwich Spitfire Mk.IX's, such as PT879, came from the Castle Bromwich factory. They didn't have the paint masked with a sharp edge to the demarcation between the topside and bottom-side colors like Supermarine did at their factory.
- All of the stencils are done to match the restoration, which in-turn are also specifically accurate to Castle Bromwich production. For instance, the wing walkway and wing trestle stencils are unique to Castle Bromwich production - I reproduced each letter of these stencils in high resolution to match.
- You will find both DTD 517 S and DTD 314 S stencils, correct to their placements on the real aircraft. Other items, like the W/T stencils, were also recreated first in high resolution, matching the exact design as they are on the restoration. 
- The red-doped fabric patches on the starboard rear fuselage and under the ailerons have a pinked-edge to the fabric, which has also been added to the normal maps. 
- Prop stencils have been added, front and back, just as they are on the restored PT879. You can also spot the little factory-applied Locked/Unlocked stencils on the spinner.
- Non-slip tape has been added to the port-side wing, just as it is on the restored aircraft. The black portion is accurate to original/wartime, while the dark green-painted portion is modern.
- The wing walkway lines on Castle Bromwich Spitfires were 1" thick, as depicted on the restoration, vs. 3/4" thick on Supermarine-produced Spitfires. These thicker lines are accurately depicted in the repaint. (One of the few departures from the real aircraft are that, since the panel lines of the product paint schemes aren't positioned quite accurately, in order to have the wing walkway lines in the correct locations on the wings they are outboard of the panel lines, while on the real aircraft they are inboard of the panel lines - however, the wing walkway lines themselves are in the right locations in relation to the wing as a whole, matching the same locations as on the restored aircraft. This way too the non-slip tape on the inboard port-wing is sized accurately as well.)
- The textures for the main landing gear and tail gear, landing gear inner doors, wheels, tires, wheel wells, pitot tube and cockpit side door lever, have all been modified. There is now a uniform silver-painted finish to the landing gear, inner landing gear doors and wheel wells, and inner flaps and flap wells, which are all authentically painted silver on the real PT879.


Thank you to Steve Atkin (Warbird Colour) for his invaluable assistance with the research for this repaint.


Repaint by John Terrell.